32mm WRAS Approved Single Cold pipe for cold water services. With trace heating element for maximum frost protection.
 
Carrier pipe: 32mm OD, 26.2mm internal bore, 16 BAR rating
75mm fully insulated insulated outer duct 
 
1) Select the insulated duct size you require (for some pipe sizes there is only one option).
2) Select the length you require.
3) Select whether you require pipe only or pipe & fittings kit (includes dust caps for the duct, terminal connections and fix points to 1" BSP male thread).
4) Select whether you require heatshrink end caps on one or both ends of the duct. If the end of a duct will not be terminated above ground in a weatherproof structure then these will be required.
5) Select whether you require a thermostat and connection kit
 
Shipping costs are dictated by pallet space required and will be calcuated at checkout.
 
Thermostat spec:  
Adjustable Range-15°C to +10°C, Switching capacity20A 230V, Single pole, single throw, Dimensions125mm x 125mm x 75mm, Ingress protectionIP66, Heat anticipator improves control accuracy, Supplied with loose IP66 cable gland
Pipe Spec:
Carrier pipes: HDPE (PE100)/SDR 11/PN16
Fluid operating temperature range: from – 10 °C up to + 20 °C
PE-X insulation foam: < 1% water absorption in accordance with ISO 2896
Maximum length available per single coil, all dimensions: 100 m
Designed in accordance with European standard EN 15632-3
CFC-free production process
 
Cut to length orders are not returnable or refundable.
Full tech specs and installation instructions can be found in the technical manual (available to download on the tech specs tab).  All information provided in the technical manual takes priority over the product information shown above.  
All products must be installed as detailed in the technical manual.
 
Call 0333 577 0210 if you require any advice or assistance.